Medtronic Physio-Control Lifepak 8

Ask About Financing

Available in US only.

Need Equipment Advice?

Ask Our Experts! (800) 462-8195

Details

Features:

  • Offers flexibility and expandability. Used as part of the Lifepak 8 system or as a complete stand-alone ECG monitor/recorder
  • The Physio Control Lifepak 8 has demand or non-demand pacing (optional)
  • Diagnostic-quality ECG recording (attachable monitor not shown)
  • Battery or AC power
  • Meets current ACLS standards
  • 3 or 5 lead for ECG input
  • Heart rate alarms
  • Available Refurbished

Specifications

ECG Monitor Module:

Patient Cable Length: 4.0m (13ft); cable 3.1m(10ft), leads 0.9m (3ft)

Common Mode Rejection: 100 dB minimum with respect to chassis ground with 51K ohms imbalance at 60 Hz. 65 dB minimum with respect to isolated ground

Cardioscope Display

Size: 76 mm (3 in) x 102 mm (4 in), non-fade

Sweep Speed: 25 1 mm/sec, 50 2 mm/sec

Recorder Modes: Real time or delayed by approximately 5 seconds

Frequency Response (-3dB): .05 Hz to 100 Hz (DIAG). 1 Hz to 30 Hz (DELAY)

Heart Rate Meter: 3 digit readout displays rates from 20 to 300 beats/min

Heart Rate Alarms: User selectable alarm limits. High 80-120 bmp | Low 20-100 bpm

ECG Output: 1V/mV, .05 Hz to 100 Hz

Freeze Control: Momentary pushbutton switch

AC Input Options: Nominally 120 VAC (90 VAC minimum, 129 VAC maximum) or 240 VAC (198 VAC minimum, 264 VAC maximum), 50 to 60 Hz

Battery Charge Time: 20 hrs for depleted battery

Maximum Power Consumption: 26 watts during cardioscope monitoring. 45 watts while recording

Size: 10.5"L x 9.5"W x 11.25"H | 26.7 x 24.1 x 28.6 cm

Weight: 16.6 lbs | 7.55 kg

Defibrillator Module

Output Paddle:

Electrode Area: 82 cm
Cord Length: 10ft (3 m)

Battery Charge Time: 20 hrs for depleted battery

Maximum Power Consumption: 160 watts during defibrillator charge. 25 watts on standby

Size: 9.75"L x 10.25"W x 11"H | 24.8 x 26 x 27.9

Weight: 19.6 lbs | 8.91 kg