Valleylab Force SSE2L ESU

Ask About Financing

Available in US only.

Need Equipment Advice?

Ask Our Experts! (800) 462-8195

Details

Features:

  • The Valleylab SSE2L is designed to provide the three most significant electrosurgical effetcs: cutting, desiccation, and fulguration
  • Provides both Monopolar and Bipolar outputs for electrosurgery
  • Preset blended cutting modes provide optimum hemostasis during cutting
  • The SSE2L allows up to 350 watts output on a cut setting
  • A monopolar foot switch is included
  • Refurbished SSE2Ls are available from DRE

Optional:

  • REM™ (Return Electrode Monitoring)
  • Bipolar foot switch is optional
  • Rolling Cart

Specifications

Dimensions: 7.6"H x 11.6"W x 16.6"D | 19.3cm x 29.5cm x 42.2cm

Weight:

  • 100/110 V - 32.5 lbs. (14.7 kg)
  • 200/240 V - 36.5 lbs. (16.6 kg)

Maximum Wattage: 350 watts

Output Waveform:

  • Cut: 500 kHz 10 kHz sinusoid with 65% 120 Hz modulation
  • Blend: 500 kHz 10 kHz sinusoid with increased amplitude bursts at 20 kHz
  • Coag: Pulse modulated 450 kHz damped sinusoid. Burst duration 7.0 Sec, nominal. Burst repitition 20 kHz 2 kHz
  • Bipolar: 500 kHz 10 kHz sinusoid, unmodulated

Monopolar Output Characteristics:

Mode

Maximum (Open Circuit P-P Voltage

Rate Load (Ohms) Control Setting = 10 (Rated Load)(Watts) Nominal Power Crest Factor @ Rated Load (typical)
Pure Cut 2800 500 375 25 1.5 CS = 5
Blend 2440 500 250 25 2.4 CS = 7
Coag 4070 500 125 15 6.4 CS = 10
  (3500 220/240V)      

Bipolar Output Characteristics:

Mode

Maximum (Open Circuit P-P Voltage

Rate Load (Ohms) Control Setting = 10 (Rated Load)(Watts) Nominal Power Crest Factor @ Rated Load (typical)
Pure Cut 700 100 90+15-20 1.8 CS = 5
Blend 640 100 85+15-20 2.1 CS = 5
Coag 1100 100 25+5-10 5.1 CS = 5
(900 220/240V)

Input Power Source: (Control setting of 10, outpu short circuit)

90-135 VAC, 50/60 Hz 180-270 VAC, 50/60 Hz
Idle: 0.6 Amperes Idle: 0.3 Amperes
Cut: 12 Amperes Cut: 6 Amperes
Coag: 4 Amperes Coag: 2 Amperes