Valleylab Surgistat Electrosurgical Generator

Ask About Financing

Available in US only.

Need Equipment Advice?

Ask Our Experts! (800) 462-8195

Details

Valleylab Surgistat Electrosurgical Generator is an isolated, solid state electrosurgical generator specifically designed for procedures which require low power and are generally performed in office, clinics, and emergency rooms.

  • Both cuts and coagulates
  • Bipolar and monopolar modes

Specifications

Dimensions: 5.05"H {6.30" including handle) x 9.5"W x 8.5"D | 12.8 cm ( 16 cm)H x 24.1 cm W x 21.6 cm D

Weight: 13 lbs, 28.6 kilograms

Cut: Max 65 watts

COAG: Max 25 watts

Output Waveform:

  • Blend Cut: 300 kHz 25 kHz damped sinusoid with 50 kHz 5 kHz repetition
  • Coag: 1MEG Hz 25 kHz damped sinusoid with 50 kHz 5 kHz repetition
  • Output Characteristics: control setting of 10
Mode Nominal open circuit p-p voltage Nominal power (watts) (500 ohm load) 500 ohm load crest factor typical
Blended Cut 2400v 400 60 + 5 3.25
Coag 4200v 400 25 + 2 - 0 8

Duty: Maximum settings: 50%, 3 minutes on, 3 minutes off

Input Power: (Control setting of 10, output short circuit)

Line Regulation:

  • Line variations of 100 volts to 130 volts, or 200 volts to 260 volts
  • Cut: Output power 40 watts at 115 volts variation less than 4 watts
  • Coag: Output power 15 watts at 115 volts variation less than 1 watt

90-130 VAC, 60 Hz, 3A C.B 180-260 VAC, 50 Hz, 1.5A C.B. Idle: 150 mA Max Idle: 75 mA Max Cut: 2.0A Max Cut: 1.0A Max Coag: 1.0A Max Coag: .50A Max